Square Gold-Border Flip-Top Jewelry Box with Ribbon Pull and Custom Logo

Square Gold-Border Flip-Top Jewelry Box with Ribbon Pull

This gold-border flip-top jewelry box is a fabric-wrapped square case with a foil-stamped scalloped frame on the lid, a soft ribbon pull-tab to lift it open, and a brushed microfiber-suede interior. It is built for jewelers, pearl and bridal-set brands, and gift retailers who want a warm, textile-finish box that photographs softer than glossy PU leather but still reads premium on the shelf. Available in two coordinated sizes — a compact ring box and a larger pendant / set box — in four stock colors. Custom-logo ready via gold foil stamping, a printed lid frame, or a satin-lining print. MOQ 500 pcs per color. Not sure which box format fits your line? See our guide to custom jewelry packaging types.

Fabric-Wrapped Construction and the Gold-Foil Border

The shell is a rigid wrapped box — hardboard wrapped in a linen-texture fabric, not flimsy folding card — so it holds a crisp square edge and a reassuring weight in the hand. The signature detail is the gold-foil scalloped border hot-stamped around the lid: a decorative frame that gives the plain fabric face a finished, jewelry-counter look without needing a metal plate or charm. A short ribbon tab at the front lifts the hinged lid smoothly with one finger.

Why a fabric finish over glossy PU leather

• Softer in photos — the woven texture scatters light into a matte, premium look; glossy PU can blow out under retail and product-photography lighting
• Warm, tactile feel — fabric and the suede interior feel softer to the touch than a hard PU surface, reinforcing a gift-worthy unboxing
• Holds foil cleanly — the fabric face takes the gold scalloped border with crisp edges, while the suede interior cradles delicate chains and pearls without scuffing

Materials at a glance

• Shell: rigid hardboard, density >1.0 g/cm³ (not cardboard)
• Exterior: linen-texture fabric wrap, soft-touch matte finish
• Lid decoration: gold-foil hot-stamped scalloped border
• Interior: brushed microfiber-suede deck with slot inserts; color-matched
• Detail: satin ribbon pull-tab; concealed hinge, flip-top lid

Two Coordinated Sizes — Ring and Pendant Set

The format ships in two sizes that share the identical fabric, gold border and ribbon pull, so they read as one coordinated series on a retail display:

Small — ring box

Compact square box with a ring-slot insert, sized for a single ring or a pair of stud earrings. The classic format for proposal rings, fashion rings and small gift items.

Large — pendant / set box

Larger square box with an open suede pad, sized for a necklace and pendant, an earring-and-pendant set, or a small parure. The pad presents the suite cleanly the moment the lid is lifted.

Custom Logo Options

Decoration is matched to the fabric exterior and the printed gold border already on the lid:

Gold foil stamping

Your logo is hot-stamped in gold (or silver / rose-gold) inside or beneath the scalloped border — the most premium and most common choice, since it sits naturally within the existing gold frame. Per our hot-stamping standards, keep line strokes ≥0.4 mm, hold solid-foil coverage under ~60% of the decorated area, and avoid sharp internal corners, which push foil-lift and fabric fray.

Printed lid frame and color

The scalloped border itself can be customized — different frame motifs, a different foil color, or your brand pattern printed in place of the standard scallop. Custom frame artwork requires a new stamping die (one-time tooling, waived above higher volumes).

Decoration inside the box

• Printed satin lining — full-color logo printed inside the lid, revealed when opened
• Embossing on the fabric face — subtle tone-on-tone pressed mark, no foil
• Custom ribbon color — the pull-tab ribbon can be color-matched or contrasted to your brand

Logo placement on the lid

The optical center of the lid sits slightly above the geometric center (KB §8 grid principle), so a logo dropped dead-center looks like it is sinking toward the ribbon. Our design team places artwork on the upper-middle third inside the gold frame and returns a dieline mock-up for sign-off, so you do not need to pre-compensate when you send the vector file.

Four Stock Colors

Stock colors: Sage Green, Blush Pink, Wine Red, and Ivory. The gold scalloped border and grey suede interior are standard across all colors; contrast interior or ribbon combinations are available on request. Custom Pantone matching for the fabric is offered for orders ≥1500 pcs per color, with a dyed swatch returned in 7-10 days for sign-off before bulk.

Quality Control, Packing and MOQ

Every box passes a multi-stage check: fabric inspection → cutting → wrapping → gold-foil stamping → hand assembly → 100% piece inspection (hinge cycle, ribbon pull-test, foil adhesion, lint clean-down) → UV sterilization + dehumidification. The dehumidify step matters for fabric and suede, which absorb more moisture than smooth PU and can develop musty odor during 30-45 day ocean transit if not properly dried.

Packing and sampling

Each box ships in an individual OPP / non-woven bag → inner carton → master export carton, honeycomb-stacked to avoid edge crush. Standard MOQ 500 pcs per color (mix the two sizes within one color toward the minimum). Pre-production samples ship in 7-10 days for stock colors, 12-15 days when custom logo or custom Pantone is involved, freight collect via DHL/FedEx. Bulk lead time 20-30 working days; reorders 15-25 working days from PO.